29 diamond ? bonding and grounding hardware bonding clamps bonding connector for meter pan (catv applications) part number description inner pack outer pack sc51-1 for #10/12/14 awg copper ground wire. made of g90 galvanize steel + trivalent chromate -- 100 ? meter pan connector designed to provide a bonding connection between the metallic frame of a meter pan and a copper ground wire. ? its unique design allows a fxed and positive mechanical contact without interfering with the opening of the meter pan front cover. ? tighten screws to 20 in. lbs. torque. installation: 1. the tip of the stainless steel mounting screw is shaped to remove the paint at the point of contact, thus ensuring positive metal-to-metal contact with the top of the meter panel. (always ensure that the bonding surface is cleaned of excess paint or rust before mounting the sc51- 1 connector.) for heavily corrosive or marine environments. use of rtv silicone sealer is recommended at the contact point, between the screw tip and the top of the meter pan. 2. back the bolt and nut from the connector enough to allow it to mount on one of the corner folds of the metal meter pan back corners. 3. install the connector with the bottom edges gripping on the bottom fold of the fxed top cover of the metal meter pan. under no circumstances is the bonding connector to be mounted on the front cover or any movable part of the metal meter pan. tighten the bolt securely by applying suffcient torque (20 inch pound) to ensure a frm and positive connection on the metal meter pan. 4. remove one inch of insulation from copper ground wire, use caution to avoid scoring or damaging ground wire. insert grounding wire between washer and grounding nut. wrap ground wire clockwise between washer and ground nut. insure that slot in grounding washer is aligned with ground wire. tighten grounding nut with cnw6 tool to secure ground wire. do not over tighten. double check that the grounding bolt is still frmly tight on the metal meter pan enclosure. if not, tighten it one quarter turn. recommended for usage when no other approved grounding electrode is accessible. bonding & grounding hardware a belden brand customer support: 800.800.6652 www.ppc-online.com
30 bonding connector for meter pan (catv applications) ? meter pan connector designed to provide a bonding connection between the metallic frame of a meter pan and a copper ground wire. ? its unique design allows a fxed and positive mechanical contact without interfering with the opening of the meter pan front cover. ? tighten screws to 20 in. lbs. torque. part number description inner pack outer pack sc51-cf meter pan connector. for #10/12/14awg copper ground wire. made of stainless steel. -- 100 sc51cf-81 meter pan ground block for coaxial cable with f81 connector. for #10/12/14awg copper ground wire. made of stainless steel -- 100 sc51cfkf81 meter pan ground block for coaxial cable with f81 connector. for #10/12/14awg copper ground wire. made of stainless steel -- 100 bonding connector for meter pan (telephone applications) part number description inner pack outer pack sc51-1t meter pan corner bonding connector for #14 to #10 awg copper ground wire. connector made of g90 galvanize steel + trivalent chromate. -- 100 sc51-2 meter pan corner bonding connector for #6awg copper ground wire. made of g90 galvanize steel + trivalent chromate -- 100 sc51cf-85 meter pan bonding connector for #6awg copper ground wire. made of stainless steel -- 100 diamond ? bonding and grounding hardware bonding clamps sc51-cf sc51cfkf81 sc51-2 sc51cf-85 meter box ground clamp part number description clamp range inner pack outer pack 40-20000 meter box ground clamp (s), #12-16 awg 6.5"-10.5" -- 50 40-20001 meter box ground clamp (l), #12-16 awg 11.5"-15.5" -- 50 40-20002 meter box ground clamp (s), #14-6 awg 6.5"-10.5" 1* 5 40-20003 meter box ground clamp (s), #14-6 awg 11.5"-15.5" 1* 5 40-20004 meter box ground clamp (s), #14-6 awg 15.5"-21.5" 1* 5 ibt1 meter box ground clamp (s), #14-6 awg 6.5"-10.5" 1* 5 ibt2 meter box ground clamp (s), #14-6 awg 15.5"-21.5" 1* 5 ? provides a convenient, quick installation of a reliable ground or bond for drops. ? 2 adjustable sizes: 6-1/2 to 10-1/2, 11-1/2 to 15-1/2. ? stainless steel bolts, screw and washer. ? mechanically galvanized astm b695. ? ul listed. ? will not restrict cover operation. ? tighten screws to 20 in. lbs. torque. * packages of 10 pieces each package. www.ppc-online.com customer support: 800.800.6652 a belden brand a belden brand
31 diamond ? bonding and grounding hardware ground blocks grounding blocks grounding bracket ? grounding bracket permits upgrading number of drops by mounting 2, 3 or 4 way splitters simply by using the sc09 splitter ring nut for mounting. ? made of g90 galvanize steel + trivalent chromate.. part number description inner pack outer pack gbs81k single ground block - outdoor precision f81 #14 awg through #6 awg copper ground wire -- 500 sc12n-81 single ground block with one precision tbcf81 connector - 3ghz #14 to #10 awg copper grounding wire. made of g90 galvanize steel + trivalent ch romate -- 150 SC12N81-1G single ground block with one precision f81 connector - 1ghz #14 to #10 awg copper grounding wire. made of g90 galvanize steel + trivalent chromate -- 150 sc12kf81-1 single ground block with one precision kf81-1 connector - 3ghz #14 to #10 awg copper grounding wire. made of g90 galvanize steel + trivalent chromate -- 150 sc12-ss single stainless steel ground block with one precision f81 connector - 2ghz #14 to #10 awg copper grounding wire. -- 150 sc12dns-81 dual ground block with one precision tbcf81 connector - 3ghz #14 to #10 awg copper grounding wire. made of g90 galvanize steel + trivalent chromate -- 100 sc12dns81-25 dual ground block with one precision tbcf81 connector - 3ghz. #14 to #10 awg copper grounding wire. made of g90 galvanize steel + trivalent chromate -- 100 sc12dn-81 dual ground block with two precision tbcf81 connectors - 3ghz #14 to #10 awg copper grounding wire. made of g90 galvanize steel + trivalent chromate -- 100 sc12d2-ss dual stainless steel ground block with two precision f81 connectors - 2ghz #14 to #10 awg copper grounding wire. -- 100 sc12d-ss dual stainless steel ground block with one precision f81 connector. 2ghz. made for #14 to #10awg copper ground wire 100 part number description inner pack outer pack sc46dn accepts connector for #14 to #10 awg copper grounding wire -- 100 splitter ring nut ? splitter ring nut especially designed for converting the sc12dn grounding blocks to accept splitters. part number description inner pack outer pack sc09-1 brass, nickel plated, .172" height 250 5,000 sc12dns-81 sc12n-81 sc12kf81-1 bonding & grounding hardware gbs81k a belden brand customer support: 800.800.6652 www.ppc-online.com
32 diamond ? bonding and grounding hardware grounding clamps span clamp part number description inner pack outer pack sc03e-2g for two steel messenger wires .051" to .072" diameter used on 1/4" (6.6m) steel strand -- 75 ? span clamp for steel messengered drop cable bonding applications. ? unique locking design prevents rotation on steel strand. ? mechanically galvanized astm b695. "i" beam grounding clamp part number description inner pack outer pack sc07gg i beam grounding clamp for #14 to #10awg copper ground wire -- 125 ? grounding clamp used to bond a solid copper ground wire to steel structure. ? mechanically galvanized astm b695. "b" ground wire clamp part number description ground wire range inner pack outer pack 23-80002 "b" ground wire clamp #12 (.081") to #6 (.162") awg 500 5,000 ? used to secure #6 awg to #12 awg ground wire runs. ? mechanically galvanized astm b695. ? 7/32 hole diameter. ? 3/8 wide x 9/16 long. ground connector part number description inner pack outer pack sc42-1 connects #4 or #6awg to #10, #12 or #14awg copper ground wire 150 1,800 ? ground connector used to connect various size copper ground conductors with a frm mechanical contact. ? made of pure copper with brass fastener. www.ppc-online.com customer support: 800.800.6652 a belden brand a belden brand
33 diamond ? bonding and grounding hardware grounding straps copper ground strap ? ground strap used to provide a fxed and permanent connection between a copper water pipe to a copper ground wire. ? made of pure copper (astm b152-110) and brass fasteners (astm b16-360 and b134-260. ? all longitudinal dimensions are based on disassembled pieces. galvanized ground strap ? ground strap used to provide a fxed and permanent connection between a galvanized steel pipe and a copper ground wire. ? made of g90 galvanized steel that meets salt test astm b117. fasteners are made of brass, nickel plated (astm b16-360 and b134-260) to create a neutral for galvanized to copper connection. ? all longitudinal dimensions are based on disassembled pieces. part number description inner pack outer pack sc13b-1 6.5" strap, fits 1/2" to 1" diameter pipe to #10/12/14 awg copper ground wire -- 150 sc13b-2 9" strap, fits 1/2" to 2-1/4" diameter pipe to #10/12/14 awg copper ground wire -- 200 sc13b-3 12" strap, fits 1/2" to 3" diameter pipe to #10/12/14 awg copper ground wire -- 150 part number description inner pack outer pack sc13bz-1 6.5" strap, fits 1/2" to 1" diameter pipe to #10/12/14 awg copper ground wire -- 150 sc13bz-2 9" strap, fits 1/2" to 2-1/4" diameter pipe to #10/12/14 awg copper ground wire -- 200 sc13bz-3 12" strap, fits 1/2" to 3" diameter pipe to #10/12/14 awg copper ground wire -- 150 sc13bz-4 23-3/4" strap. fits 1/2" to 6" diameter pipe for #10/12/14 awg copper ground wire -- 100 bonding & grounding hardware a belden brand customer support: 800.800.6652 www.ppc-online.com
34 diamond ? bonding and grounding hardware mechanical - split bolt connectors, jumper clamps high strength split bolt connectors part number size dimensions (in) inner pack outer pack a b c d dg2 #2 0.309 0.615 0.875 1.240 100 400 dg4 #4 0.209 0.453 0.688 0.984 100 800 dg6 #6 0.165 0.413 0.625 0.906 100 800 dg8 #8 0.146 0.413 0.562 0.854 100 800 ? for copper to copper connections. ? high strength corrosion resistant copper alloy for use in bonding applications. ? highly resistant to corrosion and seasonal cracking. ? hex design nut of high strength corrosion-resistant bronze alloy. ? pressure bar is copper. ? ul and csa listed. type k - jumper clamp ? for all combinations of aluminum, copper and steel conductors. ? cast of high strength bronze alloy cda836. ? furnished with silicon bronze bolt and lockwasher. lockwasher minimizes loosening of installed clamp. ? parallel groove design; no need to remove bolt for installation. ? only one size for all requirements from no. 8 solid copper to 1/0 acsr or 2/0 copper. part number description inner pack outer pack k1ds bonds 1/4" and 5/16" strand to #6 awg copper ground wire, tin plated clamp (except for 1 wire groove) with galvanized steel bolt 100 600 k2ds bonds 1/4" and 5/16" strand to #6 awg copper ground wire, tin plated clamp with galvanized steel bolt 100 600 k3ds bonds 1/4" and 5/16" strand to #6 awg copper ground wire, non-plated clamp with galvanized steel bolt 100 600 kulds bonds 1/4" and 5/16" strand to #6 awg copper ground wire, tin plated clamp with bronze bolt 100 600 k1ds kulds www.ppc-online.com customer support: 800.800.6652 a belden brand a belden brand
35 diamond ? bonding and grounding hardware mechanical - ground rod clamps bonding & grounding hardware type jab ground rod clamps ? cast of high strength corrosion resistant copper alloy cda955. ? hex head. ? long bearing surface of clamp on ground wire secures ground connection. ? u.l. listed for direct burial. part number nominal rod diameter wire range dimensions (in) package quantity in mm max min max (mm2) min (mm2) a (max) socket screw a (max) hex bolt screw thread size b c d jab12h-ds 1/2 12.7 2 str. 10 sol. 33.6 5.2 1-19/32 2-3/32 7/16"- 14unc 15/16" 63/64" 11/16" 100 jab34h-ds 3/4 19.0 1/0 str. 8 sol. 53.4 8.3 2 2-11/32 7/16"- 14unc 11/16" 1" 51/64" 50 jab58h-ds 5/8 15.8 1/0 str. 8 sol. 53.4 8.3 1-27/32 2-13/64 7/16"- 14unc 51/64" 7/8" 19/32" 50 part number nominal rod diameter wire range dimensions (in) package quantity in mm max min max (mm2) min (mm2) a (max) bolt screw thread size b c d e g3-ds 3/8 9.5 4 str. 10 sol. 21.6 5.2 -- 5/16"- 18unc 11/16" 1/2" 27/64" 3/8" 100 g4-ds 1/2 12.7 2 str. 10 sol. 33.6 5.2 -- 3/8"- 16unc 49/64" 21/32" 33/64" 1/2" 100 g5-ds 5/8 15.8 2 str. 10 sol. 33.6 5.2 -- 3/8"- 16unc 29/32" 19/32" 21/32" 1/2" 50 ? a dependable ground connection offered at a substantial savings. ? cast of high strength corrosion-resistant copper alloy cda955. ? hex head bolts. ? simplifed compact design will make a lasting, trouble-free connection. ? u.l. listed for direct burial. jab12hds jab34hds jab58hds type g ground rod clamps g3ds g4ds g5ds a belden brand customer support: 800.800.6652 www.ppc-online.com
36 diamond ? bonding and grounding hardware mechanical - grounding connectors and clamps die cast zinc water pipe clamp ? budget price clamps. ? made of die cast zinc alloy with zinc plated screws. part number water pipe size conductor range package quantity maximum minimum bj1ds 1/2"-1" #2 stranded #10 solid 250 cast bronze water pipe clamp ? for connecting grounding conductor to water pipe or copper tube. ? cast of high strength, highly conductive copper alloy. ? zinc plated crews plated for corrosion resistance. ? ul listed. part number water pipe size conductor range dimensions (in) package quantity maximum minimum a b c jds 1/2"-1" #2 stranded #10 solid 2-3/4 2-11/32 23/32 100 www.ppc-online.com customer support: 800.800.6652 a belden brand a belden brand
37 diamond ? bonding and grounding hardware mechanical - grounding connectors and clamps trailer ground clamp ? 7/16 tin plated hex head bolt installs with terminal wrench or crescent wrench. square head bolt allows clamp to be installed with pliers. ? ground wire hole access from four directions minimizes having to bend ground wire. ? designed so ground wire may be installed on clamp prior to mounting the clamp on metal frame, reducing installation time. ? beam and ground wire connection can be separately tightened without disconnect integrity of ground circuit. ? high strength copper alloy cda956 (91% nominal) providing greater conductivity, durability and excellent corrosion resistant characteristics without reliance on plating. ? high strength anchoring bolt penetrates paint. ? bolts are electro-galvanized. blade-type ground wire screw is tin-plated. part number bolt type unit quantity standard package tgcds square head - 15/16" - 18unc bolt 25 100 tgchds slotted screw head - 5/16" - 24unf 25 25 bonding & grounding hardware a belden brand customer support: 800.800.6652 www.ppc-online.com
|
